Dock Hardware

Tie Down Engineering, Angle 2-1/2

Tie Down Engineering, Angle 2-1/2" L X 5" W, 26527

F. Should be used for all cross supports. Each leg 2-1/2"L x 5"H. Description: Standard Grade..

$10.02

Tie Down Engineering, Back Up Plate, 26413

Tie Down Engineering, Back Up Plate, 26413

Q. Reinforcing plates are used to back up single T males and females. 5" x 5"...

$11.62

Tie Down Engineering, Chain Holder Injin, 26410

Tie Down Engineering, Chain Holder Injin, 26410

J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1..

$77.65

Tie Down Engineering, Chain Holder, 26529

Tie Down Engineering, Chain Holder, 26529

J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1..

$61.44

Tie Down Engineering, Dock Hardware (M) Carriage Bolt Set, 8/Bag, 26534

Tie Down Engineering, Dock Hardware (M) Carriage Bolt Set, 8/Bag, 26534

Used to attach A thru K component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvaniz..

$16.01

Tie Down Engineering, Dock Hardware Carriage Bolt Set, 8/Box, 26535

Tie Down Engineering, Dock Hardware Carriage Bolt Set, 8/Box, 26535

Used to attach A thru K component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvaniz..

$44.84

Tie Down Engineering, Dock Hdw Lag Bolt 3/8X3 8/Bag, 24289

Tie Down Engineering, Dock Hdw Lag Bolt 3/8X3 8/Bag, 24289

Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Bag: 8Size: 3..

$14.42

Tie Down Engineering, Dock Hdw Lag Bolt 3/8X5 8/Bag, 24292

Tie Down Engineering, Dock Hdw Lag Bolt 3/8X5 8/Bag, 24292

Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Bag: 8Size: 3..

$20.02

Tie Down Engineering, Female T Connector Ingin, 26407

Tie Down Engineering, Female T Connector Ingin, 26407

G. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H. Description: ..

$46.55

Tie Down Engineering, Female T-Connector, 26528

Tie Down Engineering, Female T-Connector, 26528

G. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H. Description: ..

$39.70

Tie Down Engineering, Heavy Duty Angle Infin, 26406

Tie Down Engineering, Heavy Duty Angle Infin, 26406

F. Should be used for all cross supports. Each leg 2-1/2"L x 5"H. Description: Commercial Grade..

$12.74

Tie Down Engineering, Heavy Duty Deck Plate, 26416

Tie Down Engineering, Heavy Duty Deck Plate, 26416

Heavy duty roller assembly. Bracket and roller bolt directly to the deck plate ( # 26416). An aid to..

$143.21

Tie Down Engineering, Heavy Duty Inside Corner 3

Tie Down Engineering, Heavy Duty Inside Corner 3" Inein, 26404

E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Re..

$118.51

Tie Down Engineering, Heavy Duty Inside Corner Indin, 26403

Tie Down Engineering, Heavy Duty Inside Corner Indin, 26403

D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit and is ..

$51.53

Tie Down Engineering, Heavy Duty Outside Corner (End) Incin, 26402

Tie Down Engineering, Heavy Duty Outside Corner (End) Incin, 26402

C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each le..

$45.55

Showing 1 to 15 of 35 (3 Pages)